So what we are going to do today is make a taser out of a disposable camera. It sounds difficult, but really it’s not. The video will show you how to do it but I will go ahead and list the things you will need for this project. Every geek should have one 😀
- Rubber Gloves (while handling the circuit board)
- Wire (speaker wire works)
- Wire Strippers
- Disposable Camera (2 for $10) at KMART
- Soldering Gun (I will make a video later how to solder if you don’t know how)
Video 1 (The Actual Complete Taser)
Video 2 (How to Make the Taser)
The flash capacitor can carry a 350 to 400 volt charge for months after the last use, and there is enough power stored there to become a health hazard if you found a way to get your hands across both terminals.
In other Words, DO NOT PUT FINGERS ON BOTH TERMINALS! I should of used gloves too, so please be careful and I or 8 Days A Geek are not responsible for any shocks or damages.
Warning: Use this device at your own risk. It delivers a VERY powerful shock. (It will break skin)
Disclaimer: The projects shown in the video can be highly dangerous or fatal if handled in the wrong manner. I DO NOT under any circumstances recommend building or using these projects shown in my videos, as they are for entertainment purpose ONLY. I or 8 Days A Geek DO NOT take responsibility for your actions that may harm yourself or others around you, as well as property damage you may inflict while building or using these projects.
Saw this on Burn Notice…always wanted to tazer a tourist with their own damn camera…